You will need VMWare software to run the virtual machine,
Please note we provide the appliance as 64 bit OS, VMWare disk image and OVF format. The VMWare is setup to use DHCP, this can be changed during configuration. If you want to run it in Microsoft Hyper-V, XEN, KVM etc you can convert the OVF image to VHD format (return to the Appliance section for links to how to do this.)
To configure the appliance you will need
(Please note webdav DNS entry should be webdav.DomainName e.g if the domain name is sme.yourdomain.com then the webdav url should be webdavsme.yourdomain.com.)
You will need to following ingress ports open
80, 443, 21, 990
If you want to use FTP/S then you will need to configure the firewall to allow FTP passive connections
The appliance can attach to all the storage providers supported by SME. You can see a list at http://storagemadeeasy.com/cloud_list.
To attach your local storage you will need to provide an FTP or WebDav interface on top of your local storage.
You will require the Authentication Details and License key that you were provided in an email to be able to configure the Appliance. Please have these to hand.
The configuration server allows you to configure
Start the VMWare instance and login to the appliance. The IP address is displayed in the console.
Setting the IP Address
Note if you don’t see an IP address please contact your system admin to enable DHCP or if DHCP is not possible for your environment then login to the Appliance as the smeconfiguser and run the following command to start the script:
This will invoke a wizard that will enable a static network IP address to be added.
This will start the configuration server on port 8080. Please make sure that you shutdown the configuration server after you have finished configuring the appliance.
Once the configuration server has been started, on your local machine, in the browser open the following URL:
You should see the Welcome Screen. To start configuration, please click Configuration link.
The Configuration page shows different options that you can configure.
In the “SME Server Hostname Settings” options you set the domain names that will be used to access the File Server.
You should have the IP address that you want to use configured in your DNS server. This change requires a reboot of the appliance.
In “SME Server Network Settings” the Admin can set the static IP address, Gateway, IP Mask and DNS server to resolve hostnames. This change requires a reboot of the appliance.
If you enter the wrong settings, you will not be able to ssh into the appliance. In this case, login from the console as smeconfiguser
and enter the following command:
This will set the configuration to default settings and you can start with default configuration
The File Server uses https to communicate with the clients for security. If you are planning to use WebDav and S3 protocol adapters then you will need a wildcard SSL certificate that matches the domain names that you have configured. Other wise the SSL certificate should match the host name that you have configured.
This will require a reboot.
Please Note that if you don’t set SSL certificates then some native clients that are set to use https will not be able to communicate with the appliance. You may be need to configure them to use http.Generating a Certificate Signing Request
To generate a Certificate Signing Request(CSR) if you are applying for certificates please see:
If you wish to use a self-signed certificate to test https then we suggest following steps 1 to 4 in this external guide to generate the necessary certificates.
. The guide shows the use of the "openssl" utility, which is available on the command line of the SME appliance. Once you have followed this guide you will have three files, server.crt; server.csr;server.key.
Once you have these run the SME Config installer open server.crt in a text editor and paste the content into the "SSL public certificate text". Similarly paste the contents of server.key into the "SSL certificate private key" text input.
Now follow the wizard to save the settings and at the end choose the reboot option. You should now be set to use private certificate SSL but note you cannot use these outside of an internal network unless the IP address is available externally.
Here you can update the appliance with the latest release. You can check for a new version here. When the appliance is updated with the new version, the installed version is saved and allows you to rollback to the previous installed version.
Smeconfiguser has permissions to reboot the server. You can reboot from the ssh console or using the configuration tool.
Once you have configured and rebooted your appliance, open a browser at http://yourdomain or http://SME appliance IP Address and you will be able to login as appladmin
Using your browser login as appladmin . Change the password after logging in for the first time. You will see the home screen, on the right hand side you will see different options to customise the website.
The appladmin account is used to configure the functionality of the appliance. Depending on your key different options will be available.
Enter the license key and depending on the key new functionality will become available in the right hand side menu. If the key is expired or you have not entered a valid key then you will only be able to use clouduser account.Changing the look and feel
You can brand and change logos for the of the appliance including the default logos for the login screen and the one displayed in the top banner after a user logs in.
Also see the dedicated Wiki entry on this topic.
The default email templates that are used with the Appliance for customer interactions can be changed here.
This screen allows you enable/disable appliance wide functionality.
The File Server uses an external email SMTP server to send registration and notification emails. Here you enter the account details that will be used to send emails.FileBox IMAP Settings (Optional):
The filebox feature provides each user and shared folder a dedicated email address. This is an optional feature. A user can send email with attachment to the firebox address. For this you will need a catch all email address and IMAP server.
SME appliance can use Zoho to view and edit MS Office (Word, Powerpoint and Excel) and RTF documents. You will need to register for Zoho API at http://apihelp.wiki.zoho.com/ and enter the API key.
The only data that is stored is data about the files and any classification information the user adds. This can be backed up for disaster recovery (as this data is stored in a database it can also be made highly available.)
You can change the ApplAdmin password.
You can see a list of all users and the packages that are assigned to them by clicking on Users on the left hand side.
You can change a users password, activate or inactivate and delete users and also configure the functionality available to him.
To Add a user Click on “Add User” and enter the details. A new user can also be added using the API.
You can edit and create User packages that are assigned to users. Sample packages are provided. User Packages allow you configure available functionality and default setting for new users.
This is the end of the configuration guide for the SME Cloud Appliance.
Back to Wiki Index